Products

USB2-UART Module (Rev.1)

Appointment:

The USB2-UART module is designed to convert the USB interface to synchronous/asynchronous USART/UART interface. The module includes a USB B connector for embedding the adapter into your own products. The module has the functionality to change the serial number, which allows you to connect several devices to one personal computer. Also included in the module is a special EMI b ESD filter designed to protect the module's electronics from electrostatic discharges and various electrical impulses that occur when a USB cable is connected to the module.

Technical characteristics:
          • Built-in linear stabilizer +3.3V;
          • Built-in EMI and ESD filter;
          • Maximum transmission rate over the USART/UART interface:921600 bits/sec;
          • USB connector Type: B type;
          • Ability to change PID and VID;
          • Operating temperature range: -40...+85 degrees. C;
          • Module dimensions: 10x10x10 mm (LxWxH)
          • Powered by USB bus;

Before using the module, you need to install the virtual COM port driver on your computer.

Link to download the driver:  Download (3,70 MB)

SI-L137-SBC single-board computer

Appointment:

A single-board computer is designed to control various devices using an operating system, for example, Linux, or control industrial equipment, motor controllers and other actuators under a real-time operating system.
Applications of a single-board computer:
          • industrial automation;
          • smart homes;
          • outdoor devices;
          • portable and portable devices;
          • test and measuring equipment;
          • medical equipment;

Analog signal capture board of the FMC standard

The SI-AD1675-FMC board is made according to the ANSI VITA 57.1 (FMC) standard and is designed for synchronous conversion of two analog signals with a bit depth of 24 bits and a sampling rate of up to 4 MHz.

Areas of application of the board:

          • industrial automation;
          • test and measuring equipment;
          • medical equipment;

Модуль с ПЛ

Module with FPGA Artix SI-XC7A35T-SOM-QTH

Назначение:

The SI-AD1675-FMC board is made according to the ANSI VITA 57.1 (FMC) standard and is designed for synchronous conversion of two analog signals with a bit depth of 24 bits and a sampling rate of up to 4 MHz.

Areas of application of the board:

          • industrial automation;
          • test and measuring equipment;
          • medical equipment;